Drainstore AG Rainwater Pumping Station – 438 litres

Rainwater Pumping Station – 610mm x 1500mm – 438 litres for above ground installations

This pumping station is pre-assembled and suitable for the handling of clean, grey or effluent water.

Suitable for removing grey water from:

• Drainage of cellars and basements
• Waste water from sinks, showers and kitchens
• Nuisance water
• Surface water drainage

Please note:
There must be a minimum of 450mm below the bottom of the inlet pipe to the base of the chamber to allow for the pump to operate.

This unit is supplied with a 110mm inlet seal to enable the inlet to be cut on site to your requirements.

Rainwater pumping stations include:

• 610mm diameter x 1500mm deep HDPE chamber
• 32mm automatic (NON SOLIDS) handling pump
• Non-return valve/gate valve
• 450mm diameter 3.5 tonne cover and frame (suitable for domestic driveway)
• 32mm outlet adaptor to connect to MDPE

Features of the Pumping Station:

• Suitable for above ground installation
• 2 Year manufacturers warranty on pump
• 10 metres of cable
• Float switch as standard
• Suitable for connection to 32mm MDPE outlet pipe
• 610mm diameter for easier installation in troublesome areas
• Supplied with 110mm seal to allow inlet to be drilled on site
• High water alarm available as optional extra – recommended
• Job ready for easy installation

BCS0006 complies with the rules and regulations of the European Union, as well as other countries, regarding the use of plastic materials in food contact applications.

The information provided is given as guidance. Buyers and users are advised of these facts so they can make their own assessment of our products under their own conditions when necessary.

Please note all images are for illustration only and may differ slightly from the actual product supplied.