Enduratank Rainwater Harvesting Filter Kits

Enduratank® Rainwater Harvesting Filter Kits

Enduratank rainwater harvesting filter kits will filter the moss and leaves going into your rainwater harvesting tank.

Available as a basket filter or self cleaning design, these filters suit every roof size whether it is a domestic house, an agricultural barn or commercial factory.

Features:

Filter Kit A

• A total retention rainwater filter with integrated dirt collecting basket
• Designed for roof sizes up to a maximum of 200 sq metres
• Easily removable filter basket
• For installation inside a rainwater tank
• Suitable for garden watering
• Ideal where no sewer connection exists
• Filter unit weight 2.2 kg
• Siphon overflow with skimming inlet
• Siphon overflow pipe to fit a 130mm hole in storage tank wall
• Calmed inlet to prevent incoming water disturbing any sediment in tank
• Calmed inlet also ensures fresh water is supplied to lower area of the tank resulting in complete and regular replenishment of stored water.

Filter Kit B 

• Designed for roof sizes up to a maximum of 450 sq metres
• Two step cleaning system independent of flow rate ensuring high filtering efficiency
• Filter cartridge location assists continuous removal of dirt
• Frost resistant
• Self-Cleaning and low maintenance
• Filter insert easily removable for cleaning
• Suitable for 110 mm (4”) down pipes
• Filter unit weight 6.2 kg
• Siphon overflow with skimming inlet
• Siphon overflow pipe to fit a 130mm hole in storage tank wall
• Calmed inlet to prevent incoming water disturbing any sediment in tank
• Calmed inlet also ensures fresh water is supplied to lower area of the tank resulting in complete and regular replenishment of stored water.

Filter Kit C

• Designed for roof sizes up to a maximum of 800 sq metres
• For installation in a pilot shaft or against the wall in frost-protected areas
• Available pre-installed in pilot shaft
• Two step cleaning system independent of flow rate ensuring high filtering efficiency.
• Filter cartridge location assists continuous removal of dirt
• Suitable for 110mm (4”) and 160mm (6”) down pipes.
• Filter unit weight 16 kg
• Siphon overflow with skimming inlet
• Siphon overflow pipe to fit a 130mm hole in storage tank wall
• Calmed inlet to prevent incoming water disturbing any sediment in tank
• Calmed inlet also ensures fresh water is supplied to lower area of the tank resulting in complete and regular replenishment of stored water.

Please note all images are for illustration only and may differ slightly from the actual product supplied.